| Quantity: | |
|---|---|
RNE-PC-15
SOLARAVEN
841912
150L high pressure vacuum tube solar geyser with manifold solar collector
Pressurized vacuum tube solar geyser with manifold solar collector is a renovation model for the compact solar water heater, which adopts advanced heat pipe solar collector technology, combines heat pipe solar panel with pressurized hot water tank.
Solar Vacuum tube collector absorbs heat from sunlight, then copper heat pipes transfer the heat to water tank, the solar water geyser heat efficiency is quicker in cloudy and low radiation days than normal solar geysers. daily average heat efficiency can up to 55%.
The 150liter high pressure solar geyser equipped a 15 tube manifold heat pipe solar collector. Suitable for a 3 person family hot water needs per day. It is widely used in South Africa and Lesotho market. For some tropical areas, it is also very suitable.
It is higher heat efficiency than flat plate solar heaters, and without over heating problems in hot summer days.
Specification:
Model | Compact High Pressure Solar Geyser Specification | Quantity 20GP/40GP/40HQ (sets) | ||||||
Solar vacuum Tube | Geyser Water Tank | |||||||
Diameter (mm) | Length (mm) | NO. (pcs) | Absorb area (㎡) | Inner Dia. (mm) | Outer Dia. (mm) | Capacity | ||
RNE-PC-10 | 58 | 1800 | 10 | 1.66 | 360 | 470 | 100L | 52/106/139 |
RNE-PC-15 | 15 | 2.08 | 150L | 45/92/112 | ||||
RNE-PC-18 | 18 | 2.57 | 180L | 40/80/96 | ||||
RNE-PC-20 | 20 | 2.85 | 200L | 38/76/93 | ||||
RNE-PC-25 | 25 | 3.41 | 250L | 32/64/77 | ||||
RNE-PC-30 | 30 | 4.25 | 300L | 26/52/63 | ||||
Technical data:
Outer tank material: SUS304 stainless steel or powder coated color steel
Inner tank material: 1.2mm thick SUS304 food grade stainless steel (Optional material SUS316L)
Solar vacuum tube material: borosilicate glass 3.3; AL-SS-CU absorb coating, with copper heat pipe inside
Frame material: 1.2mm thickness stainless steel or aluminum alloy
Insulation material: 55mm thickness polyurethane
Suitable for mains pressure water(up to 6 bar )
Easy plug-in installation
Install the T/P valve on the pressurized water tank
Seal material: Stabilized High Temperature Silicon
High thermal performance and working temperature: the heat exchanging rate even in winter can up above 55%.
Heat collecting efficiency is at least 20% above common flat plate solar water heater systems.
Work in all day and all season: no matter any corner of the world, this solar geyser can work well even -30ºC to avoid the tube freezing problem.
Reliability: No water inside the solar vacuum tubes, so water scale can not generate and tube cracks could be avoided, the solar water geyser system still can keep working even with some damaged tubes.
It can connect with water tap and work automatically with max pressure 0.6Mpa, bring enjoyable washing experience.
Safety: P/T valve would release pressure and temperature to protect solar geyser tank.
More display:
200liter high pressure solar geyser on pitched roof
High pressure solar geyser on flat roof
manifold vacuum tube collector solar geyser on ground
150L high pressure vacuum tube solar geyser with manifold solar collector
Pressurized vacuum tube solar geyser with manifold solar collector is a renovation model for the compact solar water heater, which adopts advanced heat pipe solar collector technology, combines heat pipe solar panel with pressurized hot water tank.
Solar Vacuum tube collector absorbs heat from sunlight, then copper heat pipes transfer the heat to water tank, the solar water geyser heat efficiency is quicker in cloudy and low radiation days than normal solar geysers. daily average heat efficiency can up to 55%.
The 150liter high pressure solar geyser equipped a 15 tube manifold heat pipe solar collector. Suitable for a 3 person family hot water needs per day. It is widely used in South Africa and Lesotho market. For some tropical areas, it is also very suitable.
It is higher heat efficiency than flat plate solar heaters, and without over heating problems in hot summer days.
Specification:
Model | Compact High Pressure Solar Geyser Specification | Quantity 20GP/40GP/40HQ (sets) | ||||||
Solar vacuum Tube | Geyser Water Tank | |||||||
Diameter (mm) | Length (mm) | NO. (pcs) | Absorb area (㎡) | Inner Dia. (mm) | Outer Dia. (mm) | Capacity | ||
RNE-PC-10 | 58 | 1800 | 10 | 1.66 | 360 | 470 | 100L | 52/106/139 |
RNE-PC-15 | 15 | 2.08 | 150L | 45/92/112 | ||||
RNE-PC-18 | 18 | 2.57 | 180L | 40/80/96 | ||||
RNE-PC-20 | 20 | 2.85 | 200L | 38/76/93 | ||||
RNE-PC-25 | 25 | 3.41 | 250L | 32/64/77 | ||||
RNE-PC-30 | 30 | 4.25 | 300L | 26/52/63 | ||||
Technical data:
Outer tank material: SUS304 stainless steel or powder coated color steel
Inner tank material: 1.2mm thick SUS304 food grade stainless steel (Optional material SUS316L)
Solar vacuum tube material: borosilicate glass 3.3; AL-SS-CU absorb coating, with copper heat pipe inside
Frame material: 1.2mm thickness stainless steel or aluminum alloy
Insulation material: 55mm thickness polyurethane
Suitable for mains pressure water(up to 6 bar )
Easy plug-in installation
Install the T/P valve on the pressurized water tank
Seal material: Stabilized High Temperature Silicon
High thermal performance and working temperature: the heat exchanging rate even in winter can up above 55%.
Heat collecting efficiency is at least 20% above common flat plate solar water heater systems.
Work in all day and all season: no matter any corner of the world, this solar geyser can work well even -30ºC to avoid the tube freezing problem.
Reliability: No water inside the solar vacuum tubes, so water scale can not generate and tube cracks could be avoided, the solar water geyser system still can keep working even with some damaged tubes.
It can connect with water tap and work automatically with max pressure 0.6Mpa, bring enjoyable washing experience.
Safety: P/T valve would release pressure and temperature to protect solar geyser tank.
More display:
200liter high pressure solar geyser on pitched roof
High pressure solar geyser on flat roof
manifold vacuum tube collector solar geyser on ground
